BCM PNT Trigger Assembly AR15 – Polished Nickel Teflon

Description

Bravo Company BCM Polished Nickel Teflon Trigger Assembly AR15

The BCM PNT Trigger Assembly (Polished – Nickel – Teflon) is precision machined Mil-Spec AISI8620 investment casting per the USGI TDP (Mil-Spec) for the M16/M4 family of weapons. (not to be confused with MIM parts that are very common in the commercial market). 156/157 holes are honed to assist in perfect alignment and a smooth trigger pull. After that, the BCM PNT Trigger and PNT Hammer then go through a 3 step heat treat and case hardening process for optimal grain structure alignment, yielding a stronger and more wear resistance product.

The sear engagement surfaces are ground, but then hand polished for increased smoothness and reduction in friction up to 300% beyond the Mil-Spec. An electroless nickel finish is applied for a smoother trigger pull with less “grit” and reduced felt “creep”. Nickel also provides a long-lasting finish that will not corrode, rust, or discolor due to oxidation. Teflon particles are embedded in the nickel, further reducing the friction of the interface and ensuring a long-lasting coating. This is done on both the BCM PNT Trigger and Hammer in order to provide the maximum benefit allowed by the nickel coating, by augmenting the low friction and corrosion resistance.

This assembly includes our impact-resistant trigger and hammer pins. They are centerless ground to a fine finish and superior tolerances to ensure compatibility with all Mil-Spec lower receivers built per the USGI TDP. The BCM Disconnector is stamped from a 1070 material and fine blanked for cleaner edges, double disc ground to a precise size. All hammer engagement surfaces are also ground for a super clean reset. The processes and tolerances are matched in the BCM PNT Trigger Assembly to create a system better than the sum of its parts.

As with all BCM products, Made in the USA.

Mfr Part: BCM-PNT-TA1

Color: Silver
Finish: Polished Nickel Teflon
Material: Steel
Weight: 2.55 oz (assembled)
Pin Diameter: .154″
Trigger Bow: Curved
Trigger Style: Single Stage
Trigger Pull: 5.5 to 6 lb
Adjustable: Non-Adjustable
Type: Mil-Spec
Fits: AR-15 / AR-308

Features:

– Precision machined Mil-Spec AISI8620 investment casting
– 3-step heat treating and case hardening process for optimal grain structure alignment for more wear resistance
– Hand polished for increased smoothness and reduction in friction
– Electroless nickel finish is applied for a smoother trigger pull with less “grit” and reduced felt “creep”
– Disconnector is stamped from a 1070 material and fine blanked for cleaner edges, double disc ground to precise size

Includes:

(1) BCM PNT Trigger AR15 – Nickel Teflon
(1) BCM PNT Hammer AR15 – Nickel Teflon
(1) Trigger Spring
(1) Hammer Spring
(1) BCM Disconnector
(1) Disconnector Spring – Black
(2) Trigger and Hammer Pin